Solar Charger Controller

Product Details:

Direct Buying Link   https://amzn.to/2LRG01u

• 50 Watts/12 Volt
• ultra cleared tempered glasses
• Cell Conversion efficiency > 19%
• 25 years* performance warranty on power output: Assured 90% of rated output in 10 years less negative tolerance. Assured 80% of rated output in 25 years less negative tolerance.
• (L*W*H) 700x335x35) mm

• Technical

  wattage (Wp)	50 watts
  voltage at max power	20.0 volts
  current at max power	2.25 amps
  open circuit voltage	25.36 volts
  short circuit current	2.40 amps
  Number of Cells	36

   

  Shipping Details

  Weight	4 Kg
  Dimensions	height - 2.2 feet width - 1.4 feet

Product Details:

Solar Charge Controller is required to convert Normal Inverter battery into solar Solutions. It is used to charge battery using solar panels. The other use of solar charge controller is to run DC load. Luminous Charge Controllers are PWM based controllers with 98% efficiency. It has USB charging Option for mobile charging & dusk to dawn feature. Dusk and down feature is used in street light application where lights is switched off in the morning and Automatically it turns on in the evening. It comes with Electronic & Software controlled protections. Maintenance Free. USB Mobile charger Output.

Features:

• Automatic selection of 12V / 24V battery
• 98% efficiency
• Fuseless electronic & software controlled protections
• USB port for Mobile charging 
• Option of SMF and lead acid battery selection
• Load controller with LVD & dusk to dawn feature

Technical:

• PWM based technology
• Automatic battery voltage selection of 12/24 Volt.
• In built low voltage disconnect & 20% extra power than rated capacity
• Supports up to 200 Watt panels on 12 Volt Battery
• Supports up to 400 Watt Panels for 24 Volt battery.

Product Details:

Luminous Solar Retrofit is an upgraded version of Solar charge controller which converts conventional Inverter to solar system. It converts 7.5  KVA 120 volt  (10 battery system) Inverter into Solar Hybrid Inverter. 

Features:

• Easy to Install and use
• Solar optimization technique
• Three modes selections
• LED/ LCD indications
• Inbuilt reverse polarity & reverse current protection

Technical specifications:

• Battery type selection switch
• Four operational modes: auto/manual/charger/100% solar
• Compatible with wide range of PV panel array wattage
• Inbuilt protections for short circuit, over voltage, over current, over charge and deep discharge.

Product Details:

Luminous shine 2420 is an upgraded version of solar charge controller which converts conventional inverter into hybrid solar system. i.e. if you already have inverter and battery, By adding suitable solar panel and shine 2420 retrofit, your existing ups / inverter will be converted into solar hybrid inverter. It works with single battery (12V) and double battery (24V) Inverter system. The first priority of shine 2420 is to charge battery, in case of extra power generation, it will run home appliances such as fans, lights directly from solar panel.

Features:

• solar optimization technique
• digital lcd display 
• inbuilt reverse polarity & reverse current protection

Technical:

• battery type selection switch
• four operational modes: auto/manual/charger/100% solar
• inbuilt protections for short circuit, over voltage and deep discharge 

Lcd display:

• battery voltage – charge level of battery
• load % - power consumption as a % of total inverter power
• output voltage
• pv voltage – solar panel generating voltage
• pv current – solar panel generating power in amps
• grid voltage – utility grid voltage level
• grid charging current – amp with which battery is being charged
• electricity saved - kwh

Product Details:

Luminous shine 3650 is latest product launched by Luminous to add up to  2000 watts of solar panel on 2 kVA or 2 battery system inverter. It an upgraded version of solar charge controller which converts conventional inverter into hybrid solar system. i.e. if you already have inverter and battery, By adding suitable solar panel and shine 3650 retrofit, your existing ups / inverter will be converted into solar hybrid inverter. It works with double battery (24V) and tripple battery (36V) Inverter system. The first priority of shine 3650 is to charge battery, in case of extra power generation, it will run home appliances such as fans, lights directly from solar panel.

Features:

• solar optimization technique
• digital lcd display 
• inbuilt reverse polarity & reverse current protection

Technical:

• battery type selection switch
• four operational modes: auto/manual/charger/100% solar
• inbuilt protections for short circuit, over voltage and deep discharge 

Lcd Display:

• battery voltage – charge level of battery
• load % - power consumption as a % of total inverter power
• output voltage
• pv voltage – solar panel generating voltage
• pv current – solar panel generating power in amps
• grid voltage – utility grid voltage level
• grid charging current – amp with which battery is being charged
• electricity saved - kwh

Product Details:

Luminous Solar Retrofit is an upgraded version of Solar charge controller which converts conventional Inverter to solar system. It converts 3.5 KVA / 48 volt (4 battery system) Inverter into Solar Hybrid Inverter.  The is a solar management unit which runs your home appliances during the day directly from the sun and rest of power is used in charging the battery.

Features:

• easy to Install and use
• solar optimization technique
• three modes selections
• LCD indications
• Inbuilt reverse polarity & reverse current protection

Technical specifications:

• Battery type selection switch
• Four operational modes: auto/manual/charger/100% solar
• Compatible with wide range of PV panel array wattage
• Inbuilt protections for short circuit, over voltage, over current, over charge and deep discharge.

Product Details:

Luminous Solar Retrofit is an upgraded version of Solar charge controller which converts conventional Inverter to solar system. It converts 5  KVA 96 volt  (8 battery system) Inverter into Solar Hybrid Inverter.

Features:

• Easy to Install and use
• Solar optimization technique
• Three modes selections
• LED/ LCD indications
• Inbuilt reverse polarity & reverse current protection

Technical Specifications:

• Battery type selection switch
• Four operational modes: auto/manual/charger/100% solar
• Compatible with wide range of PV panel array wattage
• Inbuilt protections for short circuit, over voltage, over current, over charge and deep discharge.

Product Details:

Solar Charge Controller is required to convert Normal Inverter battery Solution into solar Solutions. It is used to charge battery using solar panels. Luminous Charge Controllers are PWM based controllers with 98% efficiency. It has option of USB charging & dusk to dawn feature. Dusk and down feature is used in street light application where lights is switched off in the morning and Automatically it turns on in the evening. It comes with Electronic & Software controlled protections. Maintenance Free. USB Mobile charger Output. Option of SMF and Lead Acid Battery selection.

Features:

• Automatic selection of 12V /24V battery
• 98% efficiency
• Fuse-less electronic & software controlled protections
• USB port for mobile charging
• Option of SMF and lead acid battery selection
• Load controller with & dusk to dawn feature.

Technical specifications:

• pwm based technology
• Automatic battery voltage selection of 12/24 Volt. 
• In built low voltage disconnect & 20% extra power than rated capacity.

Product Details:

Solar Charge Controller is required to convert Normal Inverter battery into solar Solutions. It is used to charge battery using solar panels. The other use of solar charge controller is to run DC load. Luminous Charge Controllers are PWM based controllers with 98% efficiency. It has USB charging Option for mobile charging. It comes with Electronic & Software controlled protections. Maintenance Free. USB Mobile charger Output.

Features:

• Fuse less electronic & software controlled protections
• USB port for Mobile charging 
• 98% efficiency
• Option of SMF and lead acid battery selection

Technical:

• PWM based technology
• In built low voltage disconnect & 20% extra power than rated capacity
• Supports up to 125 Watt panels on Single Battery (12V).

Product Details:

Microtek’s solar management unit is best suited for low-power applications. It is used to charge battery from solar panels. The micro-controller in Microtek Solar Management Unit, senses the battery full-charge voltage and it cuts off the battery from charging, when it reached full charge status. It reconnects the battery if the battery charge drops to a preset level.

Led Indications:

• Solar Charging
• Panel Reverse polarity
• Battery reverse polarity
• Output On

Product Details:

Microtek’s solar management unit is best suited for low-power applications. It is used to charge battery from solar panels. The micro-controller in Microtek Solar Management Unit, senses the battery full-charge voltage and it cuts off the battery from charging, when it reached full charge status. It reconnects the battery if the battery charge drops to a preset level.

Led Indications:

• solar charging
• panel Reverse polarity
• battery reverse polarity
• output on

Product Details:

Microtek’s solar management unit is best suited for low-power applications. It is used to charge battery from solar panels. The micro-controller in Microtek Solar Management Unit, senses the battery full-charge voltage and it cuts off the battery from charging, when it reached full charge status. It reconnects the battery if the battery charge drops to a preset level.

Led Indications:

• Solar Charging
• Panel Reverse polarity
• Battery reverse polarity
• Output On

Product Details:

Microtek’s solar management unit is best suited for low-power applications. It is used to charge battery from solar panels. The micro-controller in Microtek Solar Management Unit, senses the battery full-charge voltage and it cuts off the battery from charging, when it reached full charge status. It reconnects the battery if the battery charge drops to a preset level.

Led Indications:

• Solar Charging
• Panel Reverse polarity
• Battery reverse polarity
• Output On

Product Details:

Microtek MSUN 2035 VA is a off grid solar inverter which is designed to give power using solar panel. It is the bigger version of Microtek 1735 VA Inverter with 30 amps solar charger and 300 VA extra power output. 

Features:

• 1200 Wp Solar Panel connectivity
• Pure Sine Wave output
• Digital display with LED indications

Inverter monitoring – Display

Microtek solar inverters are made with customer friendly monitoring system, there are two kinds of display in inverters to monitor functioning of solar inverters. 

Product Details:

Solar Charge Controller is required to convert Normal Inverter into hybrid solar Solutions. It is used to charge battery using solar panels. This product is able to charge up 12 V and 24V battery using solar panels.

Special Features:

• it connects with single and double batteries.
• Protections provided against short-circuit, voltage fluctuations
• LCD display is provided for easy monitoring of the system.

Display indications:

• power available - mains on
• connected with electricity - mains connected
• battery low warning
• charging from solar - solar charging
• Rupee savings.

Product Details:

Microtek’s solar management unit is best suited for low-power applications. It is used to charge battery from solar panels. The micro-controller in Microtek Solar Management Unit, senses the battery full-charge voltage and it cuts off the battery from charging, when it reached full charge status. It reconnects the battery if the battery charge drops to a preset level. If you normal inverter and battery at home and you want to upgrade for solar so with this controller you can convert your normal inverter to solar inverter and you can connect it with solar panel.

Led Indications:

• Solar Charging
• Panel Reverse polarity
• Battery reverse polarity
• Output On